BULK PRESSURE TANKER

Specifications ± **
Font Decrease Font Increase Print
VESSEL DETAILS
Compliance Indian Standard IS 2825 1969 Class 3/AS 1210 class 3 unfired Pressure Vessels.
Discharge Side
Loading 4 x 450 mm diameter hatches.
Designed working pressure 165 to 180 kpa
Test pressure 248 to 270 kpa
Material HU 300 or 460 R Certified Boiler Plate
Pressure Gauge 100 mm diameter 0-250 kpa fluid immersed.
Relief Valve In accordance with IS 2825 class 3 requirements
ANCILLARY EQUIPMENTS
Fluidisers 3 per fluidising cone or equivalent.
Discharge Valves 125 mm butterfly type valve
Pipe Delivery pipe 125 mm
King Pin Dia 50.8 mm as per IS 6763 Part I. Optional 88.9 mm
Landing Legs Two Speed interlinked for simultaneous lifting. Static capacity 80 T, Lifting capacity 28 T. Provided with swivel foot for stable support.
Suspension Leaf spring suspension comprising of cast anchor brackets and load equalizing brackets with poly bushes & hardened pins. Leaf spring free ended & semi-elliptical.
Axles Hollow square construction 150 x 150 x 14 mm. Precision machined and hardened to receive taper roller bearings, hub, drums. Hubs have 10 bolts at PCD 335 mm.
Tyre 10.00 x 20 16 PR
Wheel Rim 7.5 x 20
Brakes Twin Line Air Brake System coupled to Tractor brake system. Trailer brakes are actuated from tractor.
Electrical 24 V DC. Includes tail lamp, red reflector. Convoy lamps on each side.
Finish Surface preparation by shot blasting equivalent to SA 2.5 std. Two coats of zinc rich primer and two coats of enamel paint in golden yellow shade or to customer preference

Internal Surface : Painted with International Protective Coatings Intershield 912 Red or Equivalent.
Also available in rigid

± Indicative specs only. Customisation on request.

** Specs subject to change without notice.
PL-Haulwel © ACCL. All rights reserved.