CAR CARRIER

Car Carrier
Specifications ± **
Font Decrease Font Increase Print
Chassis
Girder Formed/Rolled of material ST 52
Cross Members at regular intervals of material IS 2062
Body The super structure is of container profile fabricated from rolled/ pressed section. The side and roof shall be of 1.6mm thk MS sheet corrugated for high rigidity with lesser weight. Front hinge top deck is provided inside the body which shall be lifted/ lowered by hydraulic cylinders provided at rear end. 1 No. inspection door on left side will be provided.
Rear Door cum Loading Ramp Loading/Unloading operated with twin hydraulic cylinders. Tubular construction with 1.6 mm thick MS plain sheet. Antiskid rod to avoid slipping of tyres.
Hydraulics Hydraulic cylinder shall be powered through PTO/Pump available in truck or Power pack. The wet kit shall include hydraulic tank, DC Valve, Relief Valve and Return line filter. Max Working pressure 170 Bar. Heavy duty cylinders shall be used for operating the top deck.
King Pin Dia 50.8 mm as per IS 6763 Part I. Optional 88.9 mm
Landing Legs Two Speed interlinked for simultaneous lifting. Static capacity 80 T, Lifting capacity 28 T. Provided with swivel foot for stable support.
Suspension Underslung leaf spring suspension comprising of anchor brackets and load equalizing brackets with poly bushes & hardened pins. Leaf spring free ended & semi-elliptical.
Axles 10 T capacity solid axles with highly precision machined spindle ends to receive taper roller bearings, hub and brake drum. Hubs have 10 bolts at PCD 335 mm for drum/rim fixation.
Tyre 10.00 x 20 16 PR
Wheel Rim 7.5 x 20
Brakes Twin Line Air Brake System coupled to Tractor brake system. Trailer brakes are actuated from tractor.
Electrical 24 V DC. Includes tail lamp, red reflector. Convoy lamps on each side of the trailer are provided.Two Nos. Halogen Bulb will be provided.
Safety Features Pins provided with split pin of proper sizes, moving components pvoided with grease nipple for lubrication, proper hangers at suitable places to hang stoppers & belts.
Finish Surface preparation by shot blasting equivalent to SA 2.5 std. Two coats of zinc rich primer and two coats of enamel paint in golden yellow shade or to customer preference
Options: Available in Rigid version

± Indicative specs only. Customisation on request.

** Specs subject to change without notice.
PL-Haulwel © ACCL. All rights reserved.