| Chassis |
All steel welded construction. Girder formed/rolled of material ST 52. Skirt rail is of rolled section along loading length of the trailer. Cross members of IS 2062 are positioned at suitable locations. |
| Dolly Assembly & Turn Table |
Fabricated structure out of standard rolled/folded sections. Ball bearing turn table draw bar assembly with imported tow eye to rated D value is provided for towing at front end of the trailer. |
| Draw Bar Assembly |
Fabricated structure with standard sections and proper reinforcement. Stopper for turn table at 60 degree is provided with reference to the central axis. |
| Suspension |
Leaf spring suspension comprising of cast anchor brackets and load equalizing brackets with poly bushes & hardened pins. Leaf spring free ended & semi-elliptical. |
| Axles |
Hollow square construction 150 x 150 x 14 mm. Precision machined and hardened to receive taper roller bearings, hub, drums. Hubs have 10 bolts at PCD 335 mm. Axles at draw bar side and rear end of the trailer are provided. |
| Tyre |
10.00 x 20 16 PR |
| Wheel Rim |
7.5 x 20 |
| Brakes |
Twin Line Air Brake System coupled to Tractor brake system. Trailer brakes are actuated from tractor. |
| Electrical |
24 V DC. Includes tail lamp, red reflector. Convoy lamps on each side. |
| Finish |
Surface preparation by shot blasting equivalent to SA 2.5 std. Two coats of zinc rich primer and two coats of enamel paint in golden yellow shade or to customer preference |
© ACCL. All rights reserved.
