| Chassis |
All steel welded construction. Girder formed/rolled of material ST 52. Skirt rail is of rolled section along loading length of the trailer. Cross members of IS 2062 are positioned at suitable locations. |
| Platform |
Aluminium Chequered Plate |
| King Pin |
88.9 mm as per IS 6763 Part II |
| Hydraulic Suspension |
6 Nos of suspension cylinder with accumulators and ball valves. |
| Hydraulic System |
Two power pack for operating suspension and steering system. Engine driven power pack and electrical driven power pack. |
| Plumbing |
Connection of various components through SS pipes and fittings with proper clamps. |
| Landing Legs |
Two Speed interlinked for simultaneous lifting. Static capacity 80 T, Lifting capacity 28 T. Provided with swivel foot for stable support. |
| Steering System |
Hydraulic cylinder and mechanical linkages in steering system for shorter turning circle diameter of less than 25 m. |
| Axles |
Round construction precision machined and hardened to receive taper roller bearings, hub, drums. Hubs have 10 bolts at PCD 335 mm. No. of Axles 6. |
| Tyre |
8.25 x 20 14 PR |
| Wheel Rim |
6.5 x 20 |
| Brakes |
Twin Line Air Brake System with ABS coupled to Tractor brake system. Trailer brakes are actuated from tractor. |
| Electrical |
24 V DC. Includes tail lamp, red reflector. Convoy lamps on each side. Height indicators are also provided. All electrical wirings are covered with fire resistant sleeves. |
| Finish |
Surface preparation by shot blasting as per IS 9954. Zinc & Aluminium Metal Spray of 99% purity is applied before application of wash primer and zinc rich primer and two coats of finish paint in shade to customer preference |
© ACCL. All rights reserved.
