FMCG TRANSPORTATION TRAILER
| Chassis |
All steel welded construction. Girder formed/rolled of material ST 52. Skirt rail is of rolled section along loading length of the trailer. Cross members of IS 2062 are positioned at suitable locations to support the pallets. Suitable taper is provided on the platfrom throughout the length towards the middle. |
| Pallet Support Structure |
Front board, rear board and roof structure are provided made of tubes and pressed sections. Partitions are provided after every pallet. Middle partition is provided throughout the length. Front, rear and roof are covered with Aluminium Sheet |
| King Pin |
Dia 50.8 mm as per IS 6763 Part I. Optional 88.9 mm |
| Landing Legs |
Two Speed interlinked for simultaneous lifting. Static capacity 80 T, Lifting capacity 28 T. Provided with swivel foot for stable support. |
| Suspension |
Leaf spring suspension comprising of cast anchor brackets and load equalizing brackets with poly bushes & hardened pins. Leaf spring free ended & semi-elliptical. |
| Axles |
Hollow square construction 150 x 150 x 14 mm. Precision machined and hardened to receive taper roller bearings, hub, drums. Hubs have 10 bolts at PCD 335 mm. |
| Tyre |
10.00 x 20 16 PR |
| Wheel Rim |
7.5 x 20 |
| Brakes |
Twin Line Air Brake System coupled to Tractor brake system. Trailer brakes are actuated from tractor. |
| Electrical |
24 V DC. Includes tail lamp, red reflector. Convoy lamps on each side. |
| Additional Fitment |
Rear Underrun Protection Device & Side Underrun Protection Device as per CMVR provided |
| Finish |
Surface preparation by shot blasting equivalent to SA 2.5 std. Two coats of zinc rich primer and two coats of enamel paint in golden yellow shade or to customer preference |
± Indicative specs only. Customisation on request.
** Specs subject to change without notice.
© ACCL. All rights reserved.
