| Body |
Side Board 4 mm thk & Floor 6 mm thk with suitable reinforcement. |
| King Pin |
Dia 50.8 mm as per IS 6763 Part I. Optional 88.9 mm |
| Landing Legs |
Two Speed interlinked for simultaneous lifting. Static capacity 80 T, Lifting capacity 28 T. Provided with swivel foot for stable support. |
| Suspension |
Leaf spring suspension comprising of cast anchor brackets and load equalizing brackets with poly bushes & hardened pins. Leaf spring free ended & semi-elliptical. |
| Axles |
Hollow square construction 150 x 150 x 14 mm. Precision machined and hardened to receive taper roller bearings, hub, drums. Hubs have 10 bolts at PCD 335 mm. |
| Tyre |
10.00 x 20 16 PR |
| Wheel Rim |
7.5 x 20 |
| Brakes |
Twin Line Air Brake System coupled to Tractor brake system. Trailer brakes are actuated from tractor. |
| Electrical |
24 V DC. Includes tail lamp, red reflector. Convoy lamps on each side. |
| Side Doors |
Hydraulic operated bottom hinged side door provided for 1 m height and top hinged swing door for full length of the body |
| Hydraulic Cylinder |
Hydraulic cylinders for body tipping and side door opening with suitable control valves. |
| Angle of Tip |
45 degrees. |
| Max height when tipped |
4400 mm |
| Finish |
Surface preparation by shot blasting equivalent to SA 2.5 std. Two coats of zinc rich primer and two coats of enamel paint in golden yellow shade or to customer preference |
Options: Rear Hydraulic Doors and Rock Breakers.
± Indicative specs only. Customisation on request.
** Specs subject to change without notice.
© ACCL. All rights reserved.
