UNDERBODY TIPPING TRAILER
Chassis
| Girder Formed/Rolled of material ST 52 |
| Cross Members at regular intervals of material IS 2062. Trailer Frame is of rugged construction with extendable provision to extend the trailer length upto 20.25 m with suitable locking mechanism. |
| King Pin |
Dia 88.9 mm as per IS 6763 Part II. |
| Landing Legs |
Two Speed interlinked for simultaneous lifting. Static capacity 80 T, Lifting capacity 28 T. Provided with swivel foot for stable support. |
| Suspension |
Heavy duty leaf spring suspension comprising of cast anchor brackets and load equalizing brackets with poly bushes & hardened pins. Leaf spring free ended & semi-elliptical. |
| Axles |
Round construction of 18 T capacity. Precision machined and hardened to receive taper roller bearings, hub, drums. Hubs have 10 bolts at PCD 335 mm. |
| Tyre |
12.00 x 20 18 PR |
| Wheel Rim |
8.5 x 20 |
| Brakes |
Twin Line Air Brake System coupled to Tractor brake system. Trailer brakes are actuated from tractor. Parking brakes are pneumatically operated. |
| Electrical |
24 V DC. Includes tail lamp, red reflector. Convoy lamps on each side. |
| Wet Kit |
Shall include pump, tank, return oil filter, tipping valve and hydraulic hoses. Operating pressure is 170 bar. |
| Hydraulic Cylinder |
Twin cylinder 5 Stage. |
| Tipping Body |
Floor sandwiched with floor of ST 52. Sides and Front Board also of ST 52. Rock breakers are provided. |
| Additional Fitment |
Rear Underrun Protection Device & Side Underrun Protection Device as per CMVR provided |
| Finish |
Surface preparation by shot blasting. One coat of zinc rich primer and two coats of enamel paint in golden yellow shade or to customer preference |
± Indicative specs only. Customisation on request.
** Specs subject to change without notice.
© ACCL. All rights reserved.
