MOBILE CONCRETING UNIT

Specifications ± **
Font Decrease Font Increase Print
18cu.m/hr CONCRETING UNIT
Drive Vehicle Engine
Mixer type Reversible Drum
Drum capacity 0.5 cum
Cycle time 100 Sec* (per batch)
Loading mechanism into hoppers Mufti stage double acting hydraulic actuators
Weighing Electronically measured independently
No. of Bins Three
Water tank with water meter 180 litres
Max concrete pressure 60 bar
Capacity of hopper 600 litres
Max Horizontal placing distance 300m
Max vertical placing distance 80m
Landing legs Hydraulically opereted Four numbers
Painting Surface preparation by shot blasting and painted in sky blue colour or to customer preference
 
Weight (Kgs) Laden
Front Axle 3700
Rear Axle 7000
Total 10700
1112 ECOMET SPECIFICATIONS
Engine H' Series 4 CTl BS III Turbocharged Intercooled
Bore X Stroke 104X 113 mm
Maximum Power 88 KW el 2400 rpm
Maximum Torque 402Nm@1600rpm
Clutch 310 mm dia single plate diaphragm dutchwith Hydraulic acutuation
Transmission 5 speed ZF synch romeeh gear box
Frame All Steel ladder type with bolted construction
Suspension Semi Elliptical Multi bet and slipper end at rear
Steering Power assisted Steering
Fuel Tank Capacity 212 he
Performance 76.3 kmph (Powered)
Max Gradeability 26.00%
GCW 11900 kgs
 
Dimensions (in mm)
Wheel Base 1200
Frcnt Track 1946
Tuming Circle Diameter 17000
Rear Track 1670
Minimum Ground Clearance 238
Overall Length 7663
Overall Width 2280
Overall Height 3700
Total Length (Combination) 8270
± Indicative specs only. Customisation on request.

** Specs subject to change without notice.
PL-Haulwel © ACCL. All rights reserved.